Logo
Language
  1. Home
  2. Service Support
  3. Service & Technical Maintenance
  4. Commercial Refrigerator

Commercial Refrigerator

Name and function of each part

Upright Type

1
Machine room

There is a cooling device inside the cabinet.

2
Condenser fins

Release the heat in the cabinet to the outside of the cabinet.

3
Condenser filter

Prevent clogging of the condenser.

4
Instrument panel of the machine room.

There is a freezer inside.

5
Grounding

protection against electric shock (only for 100V models, single phase)

6
Power cable

plug into the dedicated power outlet.

7
Control plan,

display settings. operation unit control panel Temperature inside the refrigerator, etc.

8
Air intake inlet

It is an air vent for circulating in the refrigerator.

9
Ventilation channel

Release cold air for chilling food.

10
Supporting plates

Plate support

11
Plate plate

Please place food on this plate.

12
Door opener

used to open and close the door.

13
Stand

used to adjust the height of the product.

14
Door gasket

There is a magnet inside to keep the door attached to the main cabinet.

15
Standard label

indicating the product model and production number.

Name and function of each part

Counter Type

1
The display section

shows values ​​such as the temperature in the cabinet.

2
Operating section

Configure such as the temperature in the cabinet

3
Product top sheet

Can also be used as a cooking table,

4
Plates

various dishes.

5
Standard labels

indicating the product model and production number.

6
Door gasket

There is a magnet inside to allow the door to be attached to the main cabinet,

7
Stand

height adjustment.

8
Machine room panel

There are various devices inside. such as electric box.

9
Condenser filter

Prevents clogging of the condenser.

10
Electrical box

with electric parts inside

11
Electric cable

plug in power socket only.

12
Ground wire

prevent electric shock (only model that is 100V, only phase).

1
Inside the cabinet/value display

normally shows the temperature in the cabinet In the case of pressing the setting switch, the set temperature will be displayed. And in the event of a malfunction of the refrigerator, an alarm will be displayed.

2
Up/down switch

Used in case of changing the temperature in the cabinet.

3
Setting/changing the switch in

case of wanting to check the set temperature If you press this switch, it will show the set temperature at “inside cabinet / value display” and press the case to release the alarm.

4
Performance check display

Show the operation of the refrigerant gas compressor. and defrost heater.